LAMBTON DOORS ArchCat V14 Spt 2019
LAMBTON DOORS
FLUSH WOOD DOORS
MASTER SPECIFICATON – United States
08 14 16
P age 2 of 6
Final Draft: V05-03A/2016
1.4
SUBMITTALS A. Submit shop drawings in conformance to the requirements of the Architectural Woodwork Standards 2 nd Edition 2014. B. Shop Drawings: illustrate door opening information such as location, size types, construction, swings, undercuts, special bevelling, hardware location and preparation requirements, blocking for hardware in mineral core doors, fire ratings, lite cut-outs, factory finish, glass, and other pertinent data. C. Product Data: Indicate door core materials, thickness, construction, veneer species. ( Note: Veneer color selection required in Ash, Birch and Maple species. Refer to Architectural Woodwork Standards [AWS]; Section 9 Doors, for cut and matching requirements and Section 5 Finishing, for factory finishing criteria.) .1 Indicate manufacturer’s full lifetime warranty. .2 Indicate glass size, type and thickness for factory glazed doors. D. Submit product data for LEED® certification submittals. E. Samples: .1 Provide door construction samples with door faces, edges, and core representative of the specified door type(s). .2 Provide pre-finished veneer sample to illustrate the color of the specified door face materials . (Note: Due to variance in wood color and grain within the same species and even within the same log, a range of color and grain shall be expected on wood products.) A. Perform work to [Custom Grade] [Premium Grade] in accordance with the Grade requirements specified in the Architectural Woodwork Standards 2 nd Edition 2014, or as herein otherwise specified. ( Note: Economy Grade does not apply to AWS Section 9 Doors. Refer to the Architectural Woodwork Standards 2nd Edition 2014 (AWS) page 251 for definitions and recommendations for Custom Grade and Premium Grade work.) B. Manufacturer specializing in products herein specified with a minimum of five years documented experience. C. Manufacturer must be a member in good standing of the Architectural Woodwork Institute (AWI). D. Provide fire-rated wood doors in compliance with NFPA 80. E. Provide fire-rated wood doors with ULC or ITS/Warnock Hersey label. LEED® Credit Summary for Wood Doors; LEED® for New Construction and Major Renovations 2009. (Note: OMIT THIS REFERENCE IF PURSUING LEED® CERTIFICATION UNDER LEED® COMMERCIAL INTERIORS VERSION 1. List ONLY applicable credits.) .1 Materials and Resources (MR) a. MR Credit 4 – Recycled Content b. MR Credit 5 – Regional Materials c. MR Credit 6 – Rapidly Renewable Materials d. MR Credit 7 – Certified Wood .2 Indoor Environmental Quality (IEQ) a. IEQ Credit 4.4 – Low-Emitting Materials: Composite Wood and Agrifiber Products B. LEED® Credit Summary for Wood Doors; LEED® Commercial Interiors Version 1.0 .1 Materials and Resources (MR) a. MR Credit 4.1 – Recycled Content 10% b. MR Credit 4.2 – Recycled Content 20% c. MR Credit 5.1 – Regional Materials, 20% Manufactured Regionally QUALITY ASSURANCE
1.5
1.6 SUSTAINABILITY STANDARDS CERTIFICATIONS A.
d.
MR Credit 5.2 – Regional Materials, 10% Extracted and Manufactured
Made with FlippingBook - professional solution for displaying marketing and sales documents online