LAMBTON DOORS ArchCat V14 Spt 2019

LAMBTON DOORS

FLUSH WOOD DOORS

MASTER SPECIFICATON – CANADA

08 14 16

Page 2 of 6

V05 03/2106

1.4

SUBMITTALS .1 Submit shop drawings in conformance to the requirements of the Architectural Woodwork Standards 2 nd Edition 2014. .2 Shop Drawings: illustrate door opening information such as location, size types, construction, swings, undercuts, special bevelling, hardware location and preparation requirements, blocking for hardware in mineral core doors, fire ratings, lite cut-outs, factory finish, glass, and other pertinent data. .3 Product Data: Indicate door core materials, thickness, construction, veneer species. ( Note: Veneer color selection required in Ash, Birch and Maple species. Refer to Architectural Woodwork Standards [AWS]; Section 9 Doors, for cut and matching requirements and Section 5 Finishing, for factory finishing criteria.) .1 Indicate manufacturer’s full lifetime warranty. .2 Indicate glass size, type and thickness for factory glazed doors. .4 Submit product data for LEED® certification submittals. .5 Samples: .1 Provide door construction samples with door faces, edges, and core representative of the specified door type(s). .2 Provide pre-finished veneer sample to illustrate the color of the specified door face materials . (Note: Due to variance in wood color and grain within the same species and even within the same log, a range of color and grain shall be expected on wood products.) .1 Perform work to [Custom Grade] [Premium Grade] in accordance with the Grade requirements specified in the Architectural Woodwork Standards 2 nd Edition 2014, or as herein otherwise specified. ( Note: Economy Grade does not apply to AWS Section 9 Doors. Refer to the Architectural Woodwork Standards 2 nd Edition 2014 (AWS) page 206 for definitions and recommendations for Custom Grade and Premium Grade work.) .2 Manufacturer specializing in products herein specified with a minimum of five years documented experience. .3 Manufacturer must be a member in good standing of the [the Architectural Woodwork Institute (AWI).] [Architectural Woodwork Manufacturer Association of Canada (AWMAC]. .4 Provide fire-rated wood doors in compliance with NFPA 80. .5 Provide fire-rated wood doors with ULC or ITS/Warnock Hersey label. Renovations 2009. (Note: OMIT THIS REFERENCE IF PURSUING LEED® CERTIFICATION UNDER LEED® COMMERCIAL INTERIORS VERSION 1. List ONLY applicable credits.) .1 Materials and Resources (MR) .1 MR Credit 4 – Recycled Content .2 MR Credit 5 – Regional Materials .3 MR Credit 6 – Rapidly Renewable Materials .4 MR Credit 7 – Certified Wood .2 Indoor Environmental Quality (IEQ) .1 IEQ Credit 4.4 – Low-Emitting Materials: Composite Wood and Agrifiber Products LEED® Credit Summary for Wood Doors; LEED® Canada Commercial Interiors Version 1.0 . (Note: OMIT THIS REFERENCE IF PURSUING LEED® CERTIFICATION UNDER LEED® CANADA FOR NEW CONSTRUCTION AND MAJOR RENOVATIONS 2009. List ONLY applicable credits.) .1 Materials and Resources (MR) .1 MR Credit 4.1 – Recycled Content 10% QUALITY ASSURANCE

1.5

1.6 SUSTAINABILITY STANDARDS CERTIFICATIONS .1 LEED® Credit Summary for Wood Doors; LEED® [Canada] for New Construction and Major

.2